How to Open & Close the Liftgate With Kick Sensor on 2025+ (6th Gen) 4Runner

Administrator

Administrator
Staff member
Joined
Mar 26, 2024
Messages
61
Reaction score
7
Reference: 2025 Owner’s Manual, pg. 134–136
Manual Link:

The 2025 4Runner comes with a hands-free power back door that can be opened or closed using a kick sensor under the rear bumper. Here’s how to close the liftgate using the foot-activated sensor.

See more on Toyota's website here: https://www.toyota.com/owners/kick-sensor/

How to Use the Kick Sensor to Close the Liftgate​

  1. Stand within 11.8 to 19.7 inches (30 to 50 cm) of the rear bumper while carrying the smart key
  2. Move your foot quickly toward the lower right side of the rear bumper (within 3.9 inches), then pull it back—complete the motion in under one second
  3. Wait for the confirmation buzzer
  4. The liftgate will begin closing automatically

Walk-Away Lock Feature​

If your 4Runner is equipped with the Walk-Away Lock function (enabled by the dealer), the rear liftgate can be set to auto-close and lock all doors as you walk away. Just make sure the smart key is with you when stepping back.

Important Notes​

  • The kick sensor is only active on the right side of the bumper
  • Do not make contact with the bumper during the kick
  • Remove dirt, snow, or mud to ensure proper sensor detection
  • If your foot stays under the bumper too long or the kick is too slow, it may not register
  • Kicking again during operation will cancel or reverse the motion
  • Smart Key must be on you — The Kick Sensor only works if the Smart Key is in your pocket, bag, etc.
  • Only one Smart Key nearby — Having more than one key around can delay sensor response.
  • Quick motion only — Don’t keep your foot under the bumper for more than a second.
  • One kick only — Multiple kicks can interrupt the operation.
  • Stand 10–13 inches back — Maintain this distance for safe and proper function.
  • Vehicle must be off — The kick sensor only works when the 4Runner is turned off.

2025 4Runner Kick Sensor Liftgate Diagram​

Refer to pages 134–136 in the Owner’s Manual for sensor placement, detection range, and usage diagrams:

Kick_Sensor_Liftgate_Diagram_01.jpg


Kick_Sensor_Liftgate_Diagram_02.jpg


Kick_Sensor_Liftgate_Diagram_03.jpg
 
Last edited:

Featured

Official Pricing will be released this fall...
Ok guys, here is a quick look at the new 6th...
I think this is the 2025 4Runner Platinum in...

Recent

Hey guys, We had a couple of customers come in looking to solve the 12V accessory wiring...
Hey all! Underground Sport Premium. 20' Nitto Ridge Grappler tires. Pretty much everything is...
I know the pro and trailhunter have wider fenders, but are the Off-road trims wider than the...
Yes they sure do. I have these laying around from my old fourth GEN and I decided to give them a...
After mocking up a few other wraps and livery concepts, I started to play around with the Turbo...
Has anyone encountered this yet with your new 4Runner? It’s starting to get humid here in FL and...
When at the New York Autoshow, I had the unique opportunity to have both a 4R Limited and LC250...
Seeing if anyone with other models have pre drilled threads in their frame for aftermarket rock...
Back at it with some wrap inspiration on the 6th Gen 4Runner. We have everything from multi-cam...
Take a look at some of these livery mockups inspired by the 1st Gen 4Runner Turbo graphics with...
Anyone install the readylift or peak performance leveling kits yet? I'm trying to decide on...

Similar

Back
Top