FOX [TRD Pro] vs Old Man Emu [Trailhunter]

DannyDrives

Member
Joined
Aug 6, 2024
Messages
31
Reaction score
9
For the years of the 5th Gen, the FOX shocks on the TRD Pro were king, but now Trailhunter is queued to rein supreme with its special Old Man Emu shocks.

Thoughts on having different shock packages between the two models?

1723143105601.png

Screengrab from TRD Jon's video

1723142761483.png

Screengrab from TRD Jon's video
 
You can't go wrong with either shock. FOX has the stronger brand name so it fits well on the TRD Pro. The FOX QS3s were tuned for more "off-road" focused driving (go-fast events with dialed compression and rebound valving). I would bet that the FOX shocks are stiffer on-road for better performance handling and they soften up as you progress into faster shock events. The OME shocks are based on the OME MT64 body with a redesigned internal specifically for the TrailHunter and are more tuned for overland stuff. Probably softer on-road for better ride comfort. Either way, both shocks will perform out of the box for most drivers. I doubt that many people will be able to tell the difference between the two unless they drive them both back to back on-road and off-road for hours on end. At the end of the day, most of these shocks are going to get ripped out and replaced with "better" high-performance, longer travel shocks anyway; KINGS, Fox race series, Dobinsons, Dirt Kings' new line of shocks, etc.
 

New Threads

Back in 2019, Trail4r provided some excellent...
Taken off today, 10/24/25 at 3400 miles. No...

Recent

Looking for an ARB 3/4 rack that comes on the Trailhunter and other trims as a factory add on...
Back in 2019, Trail4r provided some excellent advice for suspension upgrades when I was buying...
Okay guys, after many people have asked for it, 4RunnerMods and the designer...
I finally got the Prinsu rack installed on the TRD Off-Road Premium and wanted to share a quick...
I just posted this on Instagram the other day with the caption "6th Gen 4Runner on Portal...
Ok guys, here is my unrealistic build mockup. 6th Gen 4Runner Supersonic Red sitting on 37"...
I noticed in the rear cargo area of the 4Runner is very poorly lit from the two low lights. I...
Setting up this thread as a guide/resource for ditch light setups as they become available for...
KC HiLiTES Underhood Lighting Kit Installation on 6th Gen 4Runner (2025+) Finally got around to...
Hey everyone, James here from Customs Unlimited! The Largest Selection of Automotive Lighting...
KC Lights has had this 4th Gen Tacoma and 250 Series Land Cruiser switch tray out for a while...
I just installed the Husky Low Profile Vent Visors (Husky Liners Outside Mount Low Profile...

Similar

Back
Top