What will be your AUX 1, 2, 3, and 4?

[DannyDrives]

I would assume lights are a given. Maybe top light bar of some kind? ditch lights? maybe even wheel well lights?

What ideas do you have?

 

[ryno]

does anyone have any info on these? are they rated to carry a load or just triggers for relays?

 

[Bernie]

My understanding is that they are prewired switches for accessories.

 

[ryno]

My understanding is that they are prewired switches for accessories.

right, but do they carry a 10-30 amp load of lighting , or just a milliamp for a relay pack?

 

[Trail4R]

right, but do they carry a 10-30 amp load of lighting , or just a milliamp for a relay pack?

Probably similar to the Bronco Upfitter switches. I had a Bronco when it came out and it's a cool feature to easily wire in an accessory - but you run out of circuits fast - especially if you have lights with dual function. Each switch/circuit is fused and rated for a certain amperage, probably a wide range of 10amps on the low end up to 40amps on the high end. Or it might be in 10amp increments; 10amp, 20amp, 30amp, 40amp for each circuit. Each lead that you connect to is coming from the primary relay pack or distribution block.

Wiring usually looks like this:

Accessory -> lead
Lead -> distribution/relay block
Distribution block -> fuse box

On the Bronco, the leads we're all in random places ready to hook up. Some were located at the grille, some in the footwell, some at the A-pillar, and a couple in the cargo area.

 

[ryno]

does anyone have a location schematic of where these wire end? meaning where you can grab the ends to tye your lighting etc into them?