Will Tacoma Throttle Enhancers Work With 6th Gen 4Runner?

DIY Gear Plate System 6th Gen 4Runner Hybrid

Trail4R · 2025-05-24T03:52:40+00:00

Ok guys, making the plunge on a plate system for the cargo area on the TRD OR Hybrid. I just removed all the plastics in the rear and it looks like it’s doable with a few notes, and maybe you guys can provide some feedback on how you would approach it. Total length around final plate (approx): 40” x 43” Total length of center bolt locations holding plate down (approx): 18” Two new holes need to be drilled into the sheet metal above the battery. Obviously, you don’t want to use a long drill bit here. Im going to use a step bit to open it up to my desired nutsert size (maybe M10s) on both sides. Then I’ll use the two current threaded holes holding the battery cover down and the two new Nutserts as final mounting points. We’ll have about 10” - 12” of plate overhang on each side, so I think that should suffice. In a perfect world, we would have mounting locations at each corner of the plate, and it might be possible, somehow, but I don’t see it without drilling into factory plastics. If you’re willing to drill into factory plastics, then that opens up other options, but for now, I’ll try to keep the plastics out of the equation. What do you guys think? Is the 18” almost on center enough to hold the plate down, or would you start drilling into plastics to get a more stable plate all the way around? I’ll also have a fridge slide on the passenger side, and if used enough, might start to bow the plate a bit. I think we should be good with the 18” distance center of plat,e but let me know what you guys think.

TRD JON

Administrator

Staff member

Aug 1, 2024

I have a throttle enhancer from ShiftPower USA for my new 4th Gen Tacoma that just came in the mail. I am excited to install it to see if it helps wake up this truck even more. The low end torque is AMAZING on this truck, and it really gets up and goes, even with the bigger tires and extra weight I added.

I’m curious if this throttle enhancer will work with the new 4Runner since the powertrain is the same and most likely the connection at the gas pedal. I will keep you all posted on my findings.

Will Tacoma Throttle Enhancers Work With 6th Gen 4Runner?

TRD JON

Administrator

New Threads

DIY Gear Plate System 6th Gen 4Runner Hybrid

TRD PRO IN “1L7”

EvolvPPF Tom Cat Gray on 6th Gen 4Runner

Recent

Goose Gear For 6th Gen 4Runner

Will the TRD Pro fit in your garage?

DIY Gear Plate System 6th Gen 4Runner Hybrid

FREE 6G4R.com Decals & Sticker Pack

Underground TRD Pro

TRD PRO IN “1L7”

Is the 6th Gen 4Runner Worth It? 5 Reasons To Consider Buying a Hybrid

EvolvPPF Tom Cat Gray on 6th Gen 4Runner

NYTOP rock sliders

Survey, are the holes threaded on your frame rail to mount rock sliders?

Break in oil change needed?

+25mm 1-Inch Spacers on Factory 6G 4Runner Wheels

Similar