KC Hilites Tacoma & LC250 Switch Tray Is Compatible with 6th Gen 4Runner

[Trail4R]

KC Lights has had this 4th Gen Tacoma and 250 Series Land Cruiser switch tray out for a while now. I wanted to see if it would fit on the 6th Gen 4Runner, and it does. There are a ton of crossover products from the 4th Gen Tacoma, 250 Series, and 6th Gen 4Runner. Here is another one. I will have a full step-by-step installation guide with this tray and the Cali Raised LED switch + bezel soon. I already started working on everything, and it's coming together.

This tray is designed to be used with their rock light kit, which includes a bus bar for power and a ground terminal as well, however, it's pretty universal. I will be mounting a Cali Raised LED Switch + Blue Sea Breaker on the tray.

Installation is super easy, three factory bolts and one provided bolt to hold the tray together.

• Find it online: https://www.kchilites.com/2024-toyota-tacoma-land-cruiser-cyclone-led-engine-tray-kit-357.html

1. Loosen the Bolt for the Leg Support​

2. Tighten The Leg Support Bolt​

3. Remove Two OEM Bolts Against the Firewall​

4. Tighten All Bolts Down and Tighten the Tray to the Leg Support​