How to remove rear carpeted panel?

[traxon]

Is there anything under the carpeted flooring in back? I assume probably not, but I'm still curious if it would be worth removing, or if there are any bits of storage underneath. I removed the rear seats and I'm just trying to flatten out the back as much as possible, for car camping. I tried prying the carpeted panel up from the back at several spots, and surprisingly, it won't budge. I'm trying not to destroy it. Any tips? I assume there are just some clips or strong velcro somewhere? Also the panel in the middle of the vehicle - any tips for removing that one? Also, there's a large plastic trim piece on the left of the panel, at the rear - I'm not sure if it's worth removing, but is there anything under there, or any tips for removing?

 

[Trail4R]

You might find what you're looking for in here:

Thread 'DIY Gear Plate System 6th Gen 4Runner Hybrid'

May 24, 2025

Base Plate System for Mounting Gear Like Drawers, Fridge Systems and More​

Ok guys, making the plunge on a plate system for the cargo area on the TRD OR Hybrid. I just removed all the plastics in the rear and it looks like it’s doable with a few notes, and maybe you guys can provide some feedback on how you would approach it.

I'll update the list with all the tools and materials soon:

• Total length around final plate (approx): 42” x 43”
• Total length of center bolt locations holding plate down (approx): 16”
• Total bolts used 7 (5 X M10 and 2 X M6 Factory Bolts)...

• Trail4R
• Replies: 17
• Forum: Cargo Storage & Drawer Systems

•