Dissent Off-Road Low Profile Front Bumper 6th Gen 4Runner

[Trail4R]

Dissent Off-Road just launched their Low Profile Front Bumper for the 2025+ 6th Gen 4Runner.

Although it's not ready yet, they will be out at Overland Expo Mountain West this year in the Air Down Gear Up Booth. If you want to check it out and you're at the event, swing by the ADGU booth and check it out. They will have this bumper in addition to their new rear bumper, which they just launched as well. If you haven't seen their rear bumper yet, take a look. https://6thgen4runner.com/threads/f...per-for-6th-gen-4runner-dissent-off-road.914/

Dissent Off-Road Front Low Profile Front Bumper (Specs and Features):

Weighing in at only 54lbs and made of steel, this is going to be a killer option for the 6th Gen 4Runner.

The bumper features recessed soft shackle compatible recovery points, and of course, D-Ring (bow shackle) compatible as well, Baja s2 cutouts, recessed and vertical winch fairlead, highlift jack points, winch clutch access, and should fit most 8-12.5k winches.

What do you guys think about this bumper compared to the other options on the market?

 

[4RunnerNation]

Daaaaaaayum, that's amazing!! Dissent is always killing it with their armor. The weight on that is pretty impressive, too. Looks great.

 

[Dissentoffroad]

Thanks for posting! We are excited about this one!
I personally am not typically a fan of the center mount only bumpers but we know they are popular so we decided to try and build the best one out there! This thing is packed with features and design aesthetic that is typically not available in the low pro space and I must say we are stoked with how this has turned out! Stay tuned for more details, we should have pricing and availability in the next couple weeks.

 

[Trail4R]

@Dissentoffroad - it's a beautiful bumper. The market needs a Dissent low profile for sure.

 

[Scarlett]

Dissent Off-Road just launched their Low Profile Front Bumper for the 2025+ 6th Gen 4Runner.

Although it's not ready yet, they will be out at Overland Expo Mountain West this year in the Air Down Gear Up Booth. If you want to check it out and you're at the event, swing by the ADGU booth and check it out. They will have this bumper in addition to their new rear bumper, which they just launched as well. If you haven't seen their rear bumper yet, take a look. https://6thgen4runner.com/threads/f...per-for-6th-gen-4runner-dissent-off-road.914/

Dissent Off-Road Front Low Profile Front Bumper (Specs and Features):

Weighing in at only 54lbs and made of steel, this is going to be a killer option for the 6th Gen 4Runner.

The bumper features recessed soft shackle compatible recovery points, and of course, D-Ring (bow shackle) compatible as well, Baja s2 cutouts, recessed and vertical winch fairlead, highlift jack points, winch clutch access, and should fit most 8-12.5k winches.

What do you guys think about this bumper compared to the other options on the market?

View attachment 2970

View attachment 2969

View attachment 2971

View attachment 2972

View attachment 2973

View attachment 2974
View attachment 2975
View attachment 2976

I thought i had a plan for my front bumper, but this one is making me rethink that plan. I like the winch access and the S2 mountings as opposed to a light bar. And 54 lbs? That might be the tipping point.

 

[Dissentoffroad]

I thought i had a plan for my front bumper, but this one is making me rethink that plan. I like the winch access and the S2 mountings as opposed to a light bar. And 54 lbs? That might be the tipping point.

Let me know if you have any questions.
The one I am assuming you are looking at has zero access or visibility to the winch with a light bar installed. If you plan to install a winch and use it that is a no go in my opinion.

 

[Scarlett]

Let me know if you have any questions.
The one I am assuming you are looking at has zero access or visibility to the winch with a light bar installed. If you plan to install a winch and use it that is a no go in my opinion.

I know there aren't a lot of options available right now and I may have inadvertently taken a pot shot at a couple of them. However, I have to say, this looks really good. I will be interested to see price and availability at launch. I feel like you will be busy building these. I also really liked your rear bumper and would be interested to know about camera relocation and how that will effect the 360 degree camera.

 

[stellarbuilt]

Yet again, another stunning bumper from Dissent Offroad. We've been running Dissent on many of our builds for years. Hands down, our favorite armor to run. Well thought-out designs, incredible functionality, lots of integrated options, etc.

You can't go wrong with anything from @Dissentoffroad.

 

[5G6G4R]

Looks really good! I like how the surface of the bumper is more tucked and recessed for the fairlead and shackle. Light placement looks great.

@Dissentoffroad will the production bumper have the holes for the badge on both sides? Also what are the cutouts just above the fairlead and shackle? Design feature or are those functional for any reason?

 

[Dissentoffroad]

Yet again, another stunning bumper from Dissent Offroad. We've been running Dissent on many of our builds for years. Hands down, our favorite armor to run. Well thought-out designs, incredible functionality, lots of integrated options, etc.

You can't go wrong with anything from @Dissentoffroad.

Appreciate the kind words! We absolutely love working with you guys!

 

[Dissentoffroad]

Looks really good! I like how the surface of the bumper is more tucked and recessed for the fairlead and shackle. Light placement looks great.

@Dissentoffroad will the production bumper have the holes for the badge on both sides? Also what are the cutouts just above the fairlead and shackle? Design feature or are those functional for any reason?

Thanks! The holes will only be on one side.
The slots above the fairlead are for viewing the the winch drum when spooling the winch.

 

[Dissentoffroad]

I know there aren't a lot of options available right now and I may have inadvertently taken a pot shot at a couple of them. However, I have to say, this looks really good. I will be interested to see price and availability at launch. I feel like you will be busy building these. I also really liked your rear bumper and would be interested to know about camera relocation and how that will effect the 360 degree camera.

We will have more details soon but we do relocate the camera and it works with the 360. Die to the new location there is a little weirdness in the 360 view but still 100% functional and usable. The new digital camera system on all these new Toyota platforms is tricky but we are one of the few if not the only bumper manufacturers that have taken the time to figure out how to integrate them into our products.

 

[Griffin 27]

Looks awesome, can chance you are making an aluminum version?. 52 pounds is really heavy hanging out on the front of the truck