TRD Pro Shift Knob Upgrade 6th Gen 4Runner

[Trail4R]

After driving my buddy's TRD Pro the other day, I really liked some of the accents in the interior. The shift knob was one of them.

I looked up the part number, and Toyota said that the TRD Pro Tacoma and Tundra share the same part number: 33504-0C110-C1. Figured it had to be the same for the 4Runner.

Confirmed, Toyota part number (33504-0C110-C1 TRD Pro Shift Knob with red stripe) does fit the 6th Gen 4Runner as well as the Tacoma and Tundra.

Knob Sub Assembly Shift - Toyota (33504-0C110-C1)

I know, I know... I spent way too much money on a red stripe. Don't @ me!!

How to Install a New TRD Pro Shift Knob​

1. Pull straight down on the collar

2. Push the Retainer Pin to the Side and Lift Up

Photo Showing Where Retainer Pin Locks Into Place (bottom of shaft)

3. Press Down the New Shift Knob

 

[Hound D]

Sooo badly want to make a cheap knob joke about the expensive "knobby make-over"...LOL it looks sick though!

 

[Lstyle407]

I’m planning on doing the same, looks great.

 

[FOX4RNR]

I would like the part numbers for the Steering Wheel, Glove Box, and Center Console Lid, Black with red stitching of course.

 

[Trail4R]

@FOX4RNR

Steering Wheel - Toyota (45100-35560-C0)

Rave has it listed for $950. Dealers have it listed for around $699.

https://toyotaparts.ourismantoyotaofrichmond.com/oem-parts/toyota-steering-wheel-4510035560c0

 

[Trail4R]

@FOX4RNR

Dash Panel with emblem: Toyota Genuine #55435-AK040-C0 (Panel, Instrument Panel Finish, End Right Hand)

There is also a guy who 3D prints the letters, but they're not very clean. The letters appear to be flat and the surface is beveled which leaves a big gap in between the letters and the dash. Would be nice if someone made letters that actually contoured to the curve in the dash.

https://www.etsy.com/listing/1650160839/toyota-4runner-tundra-tacoma-fj-cruiser

 

[4RunnerMods]

@Trail4R I was able to fix that issue with the TOYOTA letters being flat. It took me a while to get the curve right on the backside, and I am still prototyping this unit, but after 3d scanning the dash and then test-fitting about 5 different prints, I found one that fits perfectly.

We might need a few guys in here to test out the fitment and overall look/feel.

We're just now printing the two-color version. I will keep this thread updated.

If anyone wants to test these TRD Pro passenger side dash letters, let me know.

Just comment below and say "interested in testing a TRD Pro letter kit" and we will send out five of them for guys to test on here. Also what bottom color do you guys want? Red, Yellow, trailhunter green, etc.

 

[Trail4R]

@4RunnerMods hell yeah dude. This is amazing!!! You should make this a dedicated thread. Im down to test one out for sure. Keep us posted on the progress and when you have a final.

 

[4RunnerMods]

@4RunnerMods hell yeah dude. This is amazing!!! You should make this a dedicated thread. Im down to test one out for sure. Keep us posted on the progress and when you have a final.

Will do.