Trailer hitch part number pt228-89445 pin problem

[MikeDuffy]

Hello, I just picked up part number PT 228-89445 which is the suggested part number on all sites for the trailer hitch on a 25 4Runner. This comes with the trailer hitch pin and cotter pin.

What I found out very quickly is that this double walled trailer hitch receiver that's part of the 6th gen frame has a double wall receiver.

The pin is about a 16th of an inch shy from allowing you to put the cotter pin in to hold the hitch.

Has anyone tried this yet with the factory Toyota hitch and pin. And had the same problem or a workaround. Thank you in advance.

 

[MikeDuffy]

Addendum to my problem with the trailer hitch pin. I went to Harbor Freight today and bought another pin that looked like it might give me that extra 16th to a quarter inch that I need to get the cotter pin in. Got home and tried it and that is short as well. What's going on toyota? I need to put a trailer on the back and you're giving me a part number that isn't fitting this new double wall trailer hitch receiver. Anybody have any problems with this and we can chime in?

 

[Trail4R]

@MikeDuffy yeah all the new Gen Toyotas have a specific hitch pin that's designed for the new double wall trailer hitch receiver. I'll send over some photos here in a bit. Super annoying. I have a handful of hitch pins that are useless on the new 4Runner.

You need this part:

4RUNNER TACOMA TOYOTA FACTORY 6" LONG HITCH PIN FOR 2 INCH RECEIVER PT228-0C231

 

[Trail4R]

Few more shots of the new Toyota hitch pin.

Here’s another one on Amazon that might work.

 

[MikeDuffy]

@MikeDuffy yeah all the new Gen Toyotas have a specific hitch pin that's designed for the new double wall trailer hitch receiver. I'll send over some photos here in a bit. Super annoying. I have a handful of hitch pins that are useless on the new 4Runner.

You need this part:

4RUNNER TACOMA TOYOTA FACTORY 6" LONG HITCH PIN FOR 2 INCH RECEIVER PT228-0C231

View attachment 3534

Thank you, after a couple of hours of searching around I found that part number as well. But my real question is it says in all of the searches that the 2025 4Runner comes with it.
So did you get the pin and the wiring plug With your new 25 model? I'm thinking this should have been supplied by all of the information I've been reading. Thank you

 

[Trail4R]

@MikeDuffy yeah I got the hitch pin and 7-pin wiring harness for towing with my TRD ORP with tow package.

 

[MikeDuffy]

@MikeDuffy yeah I got the hitch pin and 7-pin wiring harness for towing with my TRD ORP with tow package.

I didn't get the tow package it just has the standard tow assist with cameras . So not sure if I'll get that seven pin coupler . Thank you