Prinsu Pro Roof Rack installed on 6th Gen 4Runner

[TRD JON]

I installed the Prinsu Pro Roof Rack on my 6th Gen 4Runner TRD ORP. I’ll get this outta the way first, no insane wind noise! Super pumped on that because the wind fairing had a rather large gap from the body line of the 4R so I was concerned.

But this thing is beefy! With the double side wall it has, thick new extrusion bars, and plenty of screws to keep it all together. The install process was fine, I wish instead of having 3 side rails to mount on each side, they just used a thicker single piece, it was a little tricky to line it all up perfectly.

But aside from that I’m super happy!

 

[Trail4R]

Solid specs on the Prinsu Pro. Also running a Prinsu Pro on the 5th Gen.. It's a quality unit.

Not live yet on Prinsu but should be soon: https://prinsu.com/category/toyota/4runner/

-All new crossbar that is 44% stronger
-6 integrated drop-in points per crossbar
-No drill installation
-Corrosion-resistant stainless steel hardware
-Two-part side rail design increases rigidity
-Bend on top of Pro Side Rail
-Recessed bolt-on mounting feet
-Ships free to the lower 48
-Increased load capacity, 700lbs dynamic – 1200lbs static

Install video from CBI - looks just like the 5th Gen.

 

[TRD JON]

Solid specs on the Prinsu Pro. Also running a Prinsu Pro on the 5th Gen.. It's a quality unit.

Not live yet on Prinsu but should be soon: https://prinsu.com/category/toyota/4runner/

-All new crossbar that is 44% stronger
-6 integrated drop-in points per crossbar
-No drill installation
-Corrosion-resistant stainless steel hardware
-Two-part side rail design increases rigidity
-Bend on top of Pro Side Rail
-Recessed bolt-on mounting feet
-Ships free to the lower 48
-Increased load capacity, 700lbs dynamic – 1200lbs static

Install video from CBI - looks just like the 5th Gen.

Thanks for the specs dude!

 

[Trail4R]

For the full step-by-step installation, check out this thread:

Thread 'Prinsu Pro Install 6th Gen (2025+) 4Runner'

Tuesday at 12:48 AM

I finally got the Prinsu rack installed on the TRD Off-Road Premium and wanted to share a quick look at the installation process.

This is the second Prinsu Pro I’ve installed—the first was on my 5th Gen 4Runner. Prinsu made a ton of solid improvements with the Pro version, and I’m stoked to be running this on the 6th Gen. Some of the most notable upgrades over the original include all stainless hardware, redesigned side plates with a 90-degree bend and slotted cutouts, stronger crossbars, and improved mounting feet.

The Pro rack is more durable overall and offers more accessory mounting...

• Trail4R
• Replies: 5
• Forum: Roof Racks

• 

 

[Trail4R]

Rack definitely takes the 6th Gen to another level.