Prinsu Pro Install 6th Gen (2025+) 4Runner

Trail4R

Administrator
Staff member
Joined
Mar 26, 2024
Messages
395
Reaction score
241
Location
Sacramento, CA
Website
trail4runner.com
I finally got the Prinsu rack installed on the TRD Off-Road Premium and wanted to share a quick look at the installation process.

This is the second Prinsu Pro I’ve installed—the first was on my 5th Gen 4Runner. Prinsu made a ton of solid improvements with the Pro version, and I’m stoked to be running this on the 6th Gen. Some of the most notable upgrades over the original include all stainless hardware, redesigned side plates with a 90-degree bend and slotted cutouts, stronger crossbars, and improved mounting feet.

The Pro rack is more durable overall and offers more accessory mounting options. I loved it on my 5th Gen and couldn’t wait to get one on this rig.

For a full breakdown of the differences, check out this post: Prinsu Pro Rack vs. Original Rack

Order here: https://prinsu.com/product/toyota-4runner-prinsu-pro-roof-rack-2025/

1. Lay Out All the Parts​

Prinsu_Install_6thGen4Runner_02.jpg


Start by laying out your crossbars, side rails, mounting feet, and fairing components.

2. Mount Crossbars, Mounting Feet & Fairing​

Prinsu_Install_6thGen4Runner_03.jpg


Assemble the crossbars to the side rails, then attach the fairing and mounting feet.

3. Remove Factory Roof Rails​

Prinsu_Install_6thGen4Runner_04.jpg


Remove the factory rails by prying off the black end caps with a plastic trim tool. It may sound like something's breaking, but it’s just the clips releasing. Underneath, remove the 12mm bolts by hand—don’t use a drill or impact driver to avoid damaging the threads.

4. Install Rubber Washers & Spacers​

Prinsu_Install_6thGen4Runner_06.jpg


Set your rubber washers and spacers in place. Fill each spacer and the internal threads with silicone—either now or after the rack is positioned. I prefer sealing them once the rack is installed to avoid excess mess.

5. Carefully Place the Rack​

Prinsu_Install_6thGen4Runner_07.jpg


With a friend’s help, carefully lift and lower the rack onto the spacers.

6. Trim Weather Stripping​

Prinsu_Install_6thGen4Runner_11.jpg


The 6th Gen 4Runner version has two additional front mounting feet. You’ll need to trim the roof weather stripping so the feet can sit directly on the roof with the included double-sided 3M tape. I marked about 1/2" on both sides with a black Sharpie, removed the stripping, made the cuts, and reinstalled it.

7. Apply Silicone & Install Hardware​

Prinsu_Install_6thGen4Runner_13.jpg


Once the rack is aligned on both sides, apply silicone generously through the spacers into the threaded holes. Prinsu includes a full-size tube, which is a nice touch. After sealing, install the new 13mm hardware by hand, tightening them about 90% of the way.

8. Final Fitment Check​

Prinsu_Install_6thGen4Runner_17.jpg


Double-check fitment and alignment, then finish hand-tightening all bolts.

That’s it! Super straightforward install.
 
Last edited:
Looks great! How long did it actually take you? Then I can take that number times it by 2.5 and know how long it will take me LOL
 
@ClarkeBar - probably two hours all in with unboxing, assembling the rack, removing the factory rack, and then final fitment and trimming of the weather stripping. It's not a hard job at all, and a friend definitely helped with this installation.
 
Thanks....I intend to shanghai my bride into helping me when I get mine LOL
Are you going to put the back window panels or lightbar on as well?
 
Thanks....I intend to shanghai my bride into helping me when I get mine LOL
Are you going to put the back window panels or lightbar on as well?

Yeah I have a KC Pro6 Titan bar (7 ring bar) + Prinsu panels + Agency6 handles + Agency6 shovel mount combo + a few other goodies going on. Should be a killer setup once it's all together.
 

Featured

Official Pricing will be released this fall...
Ok guys, here is a quick look at the new 6th...
I think this is the 2025 4Runner Platinum in...

Recent

After installing our Peak Suspension 2.25" (front) and 2" (rear) lift kit, we thought we were...
I just wrapped up installing the Peak Suspension 2-piece collar lift kit on our 2025 TRD...
I will be putting a deposit on a Platinum, tomorrow (May 9th). Does anyone know when the factory...
I just crossed the 1000 mile mark on the 4Runner and wanted to give my thoughts so far. Some...
Between doing my research for the last 7 months and watching @TRD JON and @ToyotaJeff , it was...
I'm driving it from Maryland to Texas and already have thoughts (it's freakin' great) but I'll...
just got my TRD Pro last week - love it
Recently got the first oil change done at 2k miles. Since then I turned off eco mode and just...
We love a good tax break! I checked me weight on my ORP and it is over 6,000 pounds so there...
I finally got the Prinsu rack installed on the TRD Off-Road Premium and wanted to share a quick...
You know that little semi-hidden stash inside the driver side door on the dash? What would you...
Hey guys! I posted on here about a product I was making and have perfected it to where I really...

Similar

Back
Top