34" tires (285/75r17) on TRD Off Road with no lift, level, or trimming?

[famrunner6g]

Can anyone tell me if I can get away with 34" tires (285/75r17 falken wildpeak at4w) with no rubbing or cutting? the wheels are 30mm offset black rhino

 

[Trail4R]

Can anyone tell me if I can get away with 34" tires (285/75r17 falken wildpeak at4w) with no rubbing or cutting? the wheels are 30mm offset black rhino

The 285/75R17 Falken Wildpeak A/T4W translates to a 34.1-inch diameter and an 11.2-inch width. That tire will fit, especially with a +30mm offset. You will have a little poke, but nothing too aggressive at all.

You might be able to get away with just removing the mud flaps in the front and maybe removing a crash plate in the wheel well for the wheel to fully lock forward and reverse.

You shouldn't have a problem with that tire. I don't foresee trimming of the front bumper or sheet metal at all, though.

Check out these posts for reference if you do have to remove your crash plates and/or mud flap.

Removing Crash Plates on 6th Gen 4Runner

 

[famrunner6g]

Awesome response! Thanks so much! They're getting mounted tomorrow so I'll keep you posted! Already removed the mud flaps and crash plates yesterday.

 

[Trail4R]

Awesome response! Thanks so much! They're getting mounted tomorrow so I'll keep you posted! Already removed the mud flaps and crash plates yesterday.

Oh nice, then yeah, you're already there. Keep this thread updated on what everything looks like when it's mounted. It would be nice to start confirming tire size fitment while showing the distance between front bumper, inner fender well, and the rear as well so others can gauge other tire sizes relative to yours.

 

[rustytaco]

Trail4R nailed it. Make sure you talk to him before you jump into any setup and he'll be a great help.