Pt. 2 Of the CBI x Taco Vinyl 6th Gen 4Runner Build.

CBI Offroad

New member
Vendor/Sponsor
Joined
Jan 2, 2025
Messages
3
Reaction score
3
Location
Idaho Falls, ID
Website
cbioffroadfab.com
IG Page
Visit Instagram
We are excited to see how the 4Runner has turned out and love its appearance now that we have a few different products on it. We are still waiting to get a front bumper, back bumper, and ladder for the 4Runner to complete the build.
  • We added a Prinsu Pro Rack, equipped with the Ridgeline handles.
  • CBI rock sliders, and we will have some kick-out sliders available soon as well.
  • Prinsu Window Panels, equipped with 2 Rotopax containers, and the other side with a pair of Mini MaxTrax.
  • CBI ditch light brackets, with Baja Designs Squadron Pro light pods.
  • The tires are actually from our 2024 Tacoma since the guys at Taco Vinyl already had a set ready to go.
  • but the tires are Falken Wildpeak R/T Tires: LT35/12.50R17
  • Suspension, we added the Peak Suspension Summit Kit- 2.25" lift. Peak Suspension Lift Kit
Here is a detailed look at all the mods:

Prinsu Pro Roof rack – 6G 4runner – Standard wind deflector​

6th Gen 4Runner Thumb 2-09307.jpg

  • Prinsu Ridgeline Handles on the roof rack – 2 sets

Prinsu Pro Accessory Panels – Both Driver’s side and Passenger side​

6th_Gen_4Runner_CBI_Prinsu_47.jpg

  • Rotopax black storage container
  • Rotopax 2 gallon water pak
  • Maxtrax mini’s – orange

CBI Offroad 6G 4runner Ditch Light Brackets – bolt on application​

6th_Gen_4Runner_CBI_Prinsu_47.jpg

  • Baja Design Squadrons in Amber

CBI Offroad Overland Rock Sliders​

6th_Gen_4Runner_CBI_Prinsu_12.jpg

  • Top plating and DOM tubing included

CBI Offroad full Overland Skid plate set – ¼” aluminum​

6th_Gen_4Runner_CBI_Prinsu_48.jpg

  • We've included the front skid plate (engine skid)
  • Transmission skid plate
  • T-Case skid plate

Peak Suspension 2 Piece Summit Kit – 2.25” Lift​

6th_Gen_4Runner_CBI_Prinsu_49.jpg

  • Front includes top plate spacers and lower spring seat adapters
  • Rear included choice of 1” or 2” spring spacer
  • Peak Tubular Upper Control Arms
    • Silent spin Dual Durometer bushings
    • Teflon coated 1” uniball from ProBearing

Wheel & Tire Package​

6th_Gen_4Runner_CBI_Prinsu_53.jpg

  • Falken A/T4W tires LT35x12.50R17
  • Black Rhino Etosha wheels – Matte Black – 17” X 8.5” with 20mm offset
We are waiting on adding front and back bumpers, and a ladder to complete the build! Let us know what you think!
 

Attachments

  • 6th Gen 4Runner Products-09355.jpg
    6th Gen 4Runner Products-09355.jpg
    959.5 KB · Views: 15
Last edited by a moderator:

New Threads

Recent

Drafting up this post as a guide/resource for new low-profile bumpers as they become available...
300 miles on my first 4Runner and the Brakes going in reverse sounds so bad for a new truck...
Base Plate System for Mounting Gear Like Drawers, Fridge Systems and More Ok guys, making the...
Finally got the ICECO APL55 and fridge slide mounted on our 6th Gen 4Runner DIY base plate. The...
I just installed the Husky Low Profile Vent Visors (Husky Liners Outside Mount Low Profile...
Hi all! I live in central Canada with -40C winters and lots of snow and ice. Im often...
If you want a FREE 6G4R.com decal, comment below with "6G4R.com Decal". That's it. Each free...
This past weekend I was able to reveal my 6th gen build in the CBI Prinsu Peak suspension booth...
Build thread for my heritage blue sr5. This will be built out to be shown at overland and off...
CBI Off-Road Just dropped a set of ditch light brackets and they're actually different than...
Installed the new CA Tuned rear cargo shelf. I also wired up an LED light for additional...
Anyone install the readylift or peak performance leveling kits yet? I'm trying to decide on...

Similar

Back
Top