Sneak Peak: KC PRO6 Gravity Titan Mounted to Prinsu Pro

[Trail4R]

 

[ClarkeBar]

Are you going to make it under your garage door there?

 

[kophoto4x4]

Looks sweet! Hows the wiring for it? like routing wise

 

[4RunnerNation]

Yooooooo this is fire dude. What color KC letter caps are you going to end up running on this bar? White or something else?

 

[Trail4R]

Are you going to make it under your garage door there?

You should have seen it with the rooftop tent!! haha, it was really tight. We had about an 1/8" of clearance - just enough to install the final light bar and brackets.

 

[Trail4R]

Looks sweet! Hows the wiring for it? like routing wise

I haven't wired it yet. I was going to wire it to one of the Aux switches, but it looks like Toyota forgot to give me a set of pigtails for each of the pre-wired switches.

 

[Trail4R]

Yooooooo this is fire dude. What color KC letter caps are you going to end up running on this bar? White or something else?

Probably going with a FDE (flat dark earth) theme to match all the Agency6 stuff. Palette will be tans, dark browns, and maybe some bronze. Not sure yet.

 

[rustytaco]

I helped install this... was a bit of a pain, but we got it done. Looks great on there.

 

[wayland702]

Looks great... I have the Prinsu Pro rack like yours (plus KC Pro6 lights)... but Prinsu states that the KC Pro6 mount/adapter is NOT compatible with the Gen 6 4Runners. What did you do to make it work... or are they giving me a bunch of BS?

 

[Trail4R]

Looks great... I have the Prinsu Pro rack like yours (plus KC Pro6 lights)... but Prinsu states that the KC Pro6 mount/adapter is NOT compatible with the Gen 6 4Runners. What did you do to make it work... or are they giving me a bunch of BS?

I made my own brackets. I used some 1/4" flat bar and made identical brackets for both sides of the rack. The end of the bracket was drilled out for the Pro6 mount, and the inside was drilled out twice so that it could mount to the side of the Prinsu with two bolts on each side. Then I made a support bracket that connected the top of the Pro6 bar to the center of the front crossbar. I'll get some pics if you want them. Let me know.

 

[ClarkeBar]

Those KCs look cool. I put Novsight Halo Pro ditch lights on the front. I have a Prinsu as well and am debating a Halo light bar to go with it up there. I did do a Garmin Power Switch and am still working out the wiring bit LOL

 

[wayland702]

I made my own brackets. I used some 1/4" flat bar and made identical brackets for both sides of the rack. The end of the bracket was drilled out for the Pro6 mount, and the inside was drilled out twice so that it could mount to the side of the Prinsu with two bolts on each side. Then I made a support bracket that connected the top of the Pro6 bar to the center of the front crossbar. I'll get some pics if you want them. Let me know.

Yes, please share. I hope it's not too involved. THANKS!!!

I'm in the midst of my '25 ORP Hydrid Ice Cap build (see below)... I think my install at 4WheelParts (Las Vegas) is going to be late next week, awaiting King Suspension parts. CBI bumper will have to be a separate install, the production lead time for this bumper is insane.

1. CBI Rock Sliders (I have the non-threaded frame hardware kit)
2. CBI Full Skids
3. CBI Covert Front Bumper for Winch
4. Baja Designs S2 Pro Black Lights - for new bumper
5. Warn Zeon XD 10-S Winch
6. Factor 55 Ultra Hook
7. Prinsu Pro Full Rack with Accessory Window Panels
8. Prinsu Grab Handles with Baja Designs Rock Lights (Qty 4)
9. King Sway Bar Links King 2.5 Front Coilovers
10. King 2.5 Front Coilover 25001-415A
10. King 2.5 Rear Shocks 25001-416A
12. Elevate King Blue Billet Upper Control Arms
13. TRD Pro Grill
14. Method 17" 703 Wheels
15. Nitto Recon Grappler Tires (35's)
16. CaliRaise OEM Style Switch Panel
17. Switch Pro 8 Unit
18. Dual ARB Brushless Air Compressor mounted in engine compartment
19. KC Cyclone V2 LEDs Under Hood Lights
20. CBI Ladder -- I have but I don't like how it mounts, might pass on it.
21. KC Pro6's -- it's from my other vehicle that I traded in, why not install it.
22. Toyota OEM Premium Horn
23, Redline Tuning Hood Stainless Steel Struts
24. AJT Injection Key Fob
25. Factor 55 HitchLink Pro 2.0
26. Lots of other minor stuff

 

[KC HiLiTES]

Looks great... I have the Prinsu Pro rack like yours (plus KC Pro6 lights)... but Prinsu states that the KC Pro6 mount/adapter is NOT compatible with the Gen 6 4Runners. What did you do to make it work... or are they giving me a bunch of BS?

That doesn't sound right. Please reach out to our team, and we will find you the right brackets for the Prinsu or the Prinsu Pro. You too, @Trail4R - if you want a set of brackets for your Prinsu, we have you covered.

(888) 689-5955
Monday - Friday
8am - 5pm PST