Lock Off-Road Invader Forged Beadlocks & 35" Arroyo MT Tires

[Trail4R]

Finally!!! They landed. We have a set of Lock Off-Road Invader Forged Beadlocks in machine finish with some 35" Arroyo M/Ts.

Beyond stoked to get these wheels mounted and finally get the 4Runner off the ground a little bit.

 

[Golden Vista]

Nice! Post some pictures once these badboys are mounted and if possible, try to measure your MPG before and after.
Those look pretty sweet, congrats!

 

[Trail4R]

Thanks, man. This is how it sat on 35" tires with a +25mm offset and no lift. It was rubbing pretty bad on the inner fender well near the rocker panel and front bumper. To run it like this, I would’ve needed to trim at least 1" of sheet metal near the rocker panel and up into the fender flares. The front bumper would also have required a 1" trim, and the fender liner would need to be pushed forward and re-mounted to the bumper. I’m still waiting on my Peak lift kit - 2.25" up front and 2" in the rear - with upper control arms for some improved caster. I decided to wait on the kit instead of trimming to revaulate exactly how much trimming will be required - if any.

 

[Trail4R]

It only took me about 5 hours to get these mounted but damn was it worth the process.

These wheels are beautiful!! Can't wait to get these mounted.