- Joined
- Mar 26, 2024
- Messages
- 823
- Reaction score
- 564
- Location
- Sacramento, CA
- Website
- trail4runner.com
2025-Current (6th Gen) Toyota 4Runner Fender Flare Kit
What do you guys think about this OEM+ Fender flare kit from Nytop? Adds 1 inch per corner on TRD Sport/Off-Road/Limited trims and 1.5 inches on SR5 trims. Designed for extra protection against dirt and debris from wider and taller off-road tires.
I saw a TRD Pro the other day and the gloss black on white was so clean! Hoping to get a white TRD ORP hybrid here soon. I would be super down to rock these fender flares.
What do you guys think about this OEM+ Fender flare kit from Nytop? Adds 1 inch per corner on TRD Sport/Off-Road/Limited trims and 1.5 inches on SR5 trims. Designed for extra protection against dirt and debris from wider and taller off-road tires.
I saw a TRD Pro the other day and the gloss black on white was so clean! Hoping to get a white TRD ORP hybrid here soon. I would be super down to rock these fender flares.
Features
- High-clearance front flares with aero stabilizing fins.
- Injection-molded polyurethane with a black primer (paintable) or carbon fiber with gloss/matte finish.
- No drilling or trimming required—installs with 3M™ Super Strength Molding Tape and OEM bolts.
- SR5 models require 14 OEM 10mm wheel well bolts for rear flare installation.
Installation Sounds Super Easy
- Clean the surface with alcohol before installation.
- Apply adhesion promoter on the back of the flares before installing 3M™ tape.
- Use a double layer of 3M™ tape for best adhesion.
- Install in temperatures above 65°F (18°C) for optimal results.
