CA Tuned Rear Cargo Shelf 2025 4Runner

ryno

Member
Joined
Jan 30, 2025
Messages
55
Reaction score
28
Installed the new CA Tuned rear cargo shelf.

I also wired up an LED light for additional lighting when opening the hatch, which works off the factory wiring, so it will turn off as the stock units do. Additionally, I added some Diode Dynamics Rock Lights to it, featuring RGBW capabilities, and used their Bluetooth controller to activate them.

IMG_8770.jpeg
IMG_8744.jpeg
IMG_8702.jpeg
IMG_8700.jpeg
IMG_8681.jpeg
 
Last edited by a moderator:
I saw him post about that awhile ago. Looked like the install was somewhat involved. You have to drop the headliner to install it, yeah? How was that process on the 6G? Pretty straightforward, or was it a process?
 
I saw him post about that awhile ago. Looked like the install was somewhat involved. You have to drop the headliner to install it, yeah? How was that process on the 6G? Pretty straightforward, or was it a process?
yes, and no.
yes you drop the rear on the headliner which is 5 push pins and the 2 side curtain sides and it drops down enough to reach in where you need too.
takes about 2 mins to do so
 
@ryno the lighting additions are pretty sick. What wires did you tap into? You have pics of that?

Also, how much storage is actually between the headliner and the shelf? Looks kinda small.
 
Last edited by a moderator:
@ryno the lighting additions are pretty sick. What wires did you tap into? You have pics of that?

Also, how much storage is actually between the headliner and the shelf? Looks kinda small.
I used a 8 gang switch panel from Bulletpoint along with their mounts for it to wire up everything, all power comes from my "house" lithium battery power batteries, running 2 of their 108 ah models.
in the center of the rack id say there is about 8" or so of clearance , its just right at your line of sight out the rear view mirror, it doesn't effect any view.
 
@ryno Copy that. Looks good. What factory wires did you tap into for the MOLLE lights?
molle lights are diode dynamics and they run off a separate switch panel that is feed by my lithium batteries. the cargo center light is tied in with the factory cargo lights that are on a door pin, so when opened they come on.
 

New Threads

Looking to mount a sand flag to the ARB roof...
74Weld Portal Axles (Gen2) Review on 6th Gen...
I want to get a 4runner 2025 either TRD pro or...

Recent

Mudify just announced they’re the first dealer to get a limited batch of the new ARB OME MT64 3"...
Hello, I just picked up part number PT 228-89445 which is the suggested part number on all sites...
74Weld Portal Axles (Gen2) Review on 6th Gen 4Runner - Tested on Rubicon With Factory Suspension...
I want to get a 4runner 2025 either TRD pro or TrailHunter, I know both are extremely capable...
If you want a FREE 6G4R.com decal, comment below with "6G4R.com Decal". That's it. Each free...
Looking to mount a sand flag to the ARB roof rack. Anyone have experience regarding which mount...
For the guys looking to run a winch on your front bumper with a hybrid 4Runner, you need to pull...
Hello, has any one come across a loud fast repetitive clicking sound when AC compressor comes...
I just posted this on Instagram the other day with the caption "6th Gen 4Runner on Portal...
I am looking for info/recommendations for installing a front facing camera into a TRD Offroad...
I'm selling the wheels that were pulled off my 6th gen 4runner Limited IForce Max. These are the...
Roof Racks Available for 2025+ 4Runner Drafting this up since roof racks are coming out right...
Back
Top