TOYOTA TRD Pro Style Passenger Dash Letters

[4RunnerMods]

What's up 6G4R fam!

Looking for a few guys who want to test out these TOYOTA TRD Pro Style Passenger Dash Letters. Let me know if you're interested in testing a set, and I will send a handful of units out, maybe 5-10?

@Trail4R shared a post in this thread (https://6thgen4runner.com/threads/trd-pro-shift-knob-upgrade-6th-gen-4runner.981/post-4527) about another set of TRD Pro-style letters not fitting quite right on the dash. The image pictured is from a 5G, but the 5G and the 6G ironically share the exact same dash profile curve. I was able to fix that issue by putting a slight curve on the backside of the TOYOTA letters in Shapr3D. It took me a while to get the curve right on the backside, and I am still prototyping this unit, but after 3D scanning the dash and then test-fitting about 5 different prints, I found one that fits perfectly.

We have printed the final two-color version, and next, we're working on an install template so the letters line up perfectly.

If anyone wants to test these TRD Pro passenger side dash letters, let me know.

Just comment below and say "TRD Pro dash letters" and I will send you a PM. Also, what bottom color do you guys want? Red, Yellow (trailhunter version), trailhunter green, white, etc.

 

[4RunnerNation]

Dude these are sick. I don't have a 6G but i'd be down to test them out on a 5G...

TRD Pro dash letters

 

[Trail4R]

@4RunnerMods dude down. Let me know when you have a final product ready to see. TRD Pro dash letters

 

[rustytaco]

Pretty slick! I like that it follows the profile of the dash so nicely. Will this work on other Toyotas? Tacoma? Tundra? Maybe LC250?

 

[4RunnerMods]

@rustytaco as of now, I have confirmed 5th Gen 4Runner and 6th Gen 4Runner fitment. I just need to work on install templates for both of them. I currently dont have access to any other vehicles.

 

[rustytaco]

@rustytaco as of now, I have confirmed 5th Gen 4Runner and 6th Gen 4Runner fitment. I just need to work on install templates for both of them. I currently dont have access to any other vehicles.

Roger! The Tacoma dash (at least some of them, not sure about all) already has a Tacoma emblem embedded. Maybe an overlay for that one?

 

[odins_beer'd]

These are crisp, would love to give them a go. TRD Pro dash letters. A white or heritage blue would be pretty sweet against black interior. I have an underground so just about anything would match.

 

[4RunnerMods]

@4RunnerNation
@Trail4R
@odins_beer'd

I'll get you guys out a set when I finalize the install template.

 

[Aj1]

I have a 6th gen 4Runner and would love to test fit! I would love the color red

 

[Vumz]

What's up 6G4R fam!

Looking for a few guys who want to test out these TOYOTA TRD Pro Style Passenger Dash Letters. Let me know if you're interested in testing a set, and I will send a handful of units out, maybe 5-10?

@Trail4R shared a post in this thread (https://6thgen4runner.com/threads/trd-pro-shift-knob-upgrade-6th-gen-4runner.981/post-4527) about another set of TRD Pro-style letters not fitting quite right on the dash. The image pictured is from a 5G, but the 5G and the 6G ironically share the exact same dash profile curve. I was able to fix that issue by putting a slight curve on the backside of the TOYOTA letters in Shapr3D. It took me a while to get the curve right on the backside, and I am still prototyping this unit, but after 3D scanning the dash and then test-fitting about 5 different prints, I found one that fits perfectly.

We have printed the final two-color version, and next, we're working on an install template so the letters line up perfectly.

If anyone wants to test these TRD Pro passenger side dash letters, let me know.

Just comment below and say "TRD Pro dash letters" and I will send you a PM. Also, what bottom color do you guys want? Red, Yellow (trailhunter version), trailhunter green, white, etc.

View attachment 3965

TRD Pro dash letters

 

[buhay4runner]

What's up 6G4R fam!

Looking for a few guys who want to test out these TOYOTA TRD Pro Style Passenger Dash Letters. Let me know if you're interested in testing a set, and I will send a handful of units out, maybe 5-10?

@Trail4R shared a post in this thread (https://6thgen4runner.com/threads/trd-pro-shift-knob-upgrade-6th-gen-4runner.981/post-4527) about another set of TRD Pro-style letters not fitting quite right on the dash. The image pictured is from a 5G, but the 5G and the 6G ironically share the exact same dash profile curve. I was able to fix that issue by putting a slight curve on the backside of the TOYOTA letters in Shapr3D. It took me a while to get the curve right on the backside, and I am still prototyping this unit, but after 3D scanning the dash and then test-fitting about 5 different prints, I found one that fits perfectly.

We have printed the final two-color version, and next, we're working on an install template so the letters line up perfectly.

If anyone wants to test these TRD Pro passenger side dash letters, let me know.

Just comment below and say "TRD Pro dash letters" and I will send you a PM. Also, what bottom color do you guys want? Red, Yellow (trailhunter version), trailhunter green, white, etc.

View attachment 3965

Would love to try it. "TRD Pro dash letters"

 

[Usernameisrob]

"TRD Pro dash letters"

Interested in trying out the black/red!

 

[RotcehCBP]

TRD Pro dash letters

What's up 6G4R fam!

Looking for a few guys who want to test out these TOYOTA TRD Pro Style Passenger Dash Letters. Let me know if you're interested in testing a set, and I will send a handful of units out, maybe 5-10?

@Trail4R shared a post in this thread (https://6thgen4runner.com/threads/trd-pro-shift-knob-upgrade-6th-gen-4runner.981/post-4527) about another set of TRD Pro-style letters not fitting quite right on the dash. The image pictured is from a 5G, but the 5G and the 6G ironically share the exact same dash profile curve. I was able to fix that issue by putting a slight curve on the backside of the TOYOTA letters in Shapr3D. It took me a while to get the curve right on the backside, and I am still prototyping this unit, but after 3D scanning the dash and then test-fitting about 5 different prints, I found one that fits perfectly.

We have printed the final two-color version, and next, we're working on an install template so the letters line up perfectly.

If anyone wants to test these TRD Pro passenger side dash letters, let me know.

Just comment below and say "TRD Pro dash letters" and I will send you a PM. Also, what bottom color do you guys want? Red, Yellow (trailhunter version), trailhunter green, white, etc.

View attachment 3965

 

[RotcehCBP]

TRD Pro dash letters

TRD Pro dash letters

 

[Tammy]

Wouldn’t mind trying for my 5th gen pro