My Home Depot makeshift sleeping platform.

MikeDuffy

New member
Joined
Oct 10, 2025
Messages
15
Reaction score
9
Location
Seal Beach, Ca
Hi all, I'm a minimalist, and today I put together a sleeping platform for my 25 TRD orp.
It consisted of a half inch piece of plywood 50 inches long by 26 inches wide. $20 and I have left over for a makeshift table.
It is sitting on top of a very sturdy HDX storage container from the depot. Nine bucks. I have been toying around with these specialized platforms that cost well over $500 to basically Jam your head right through the roof.

So the real Simplicity of this if I'm traveling solo in the outback or on a long distance drive and feel the need for a little snooze I'm set.

Also if I want to expand, just put down put another piece of plywood.

I can plug my little coffee percolator with instant coffee and I'm good to go till the next Roadside Diner. The storage containers are quite large and can easily hold a small cooking stove, propane , headlamps, axe, p365 etc. I have room for a small good quality ice chest that will hold a solid dinner and a breakfast for one night.

Could probably stretch it to a two nighter or even a three nighter with a bigger cooler. I have lots of room to stack storage containers. I got a good laugh from a few friends but it will work for me. Picture attached
 

Attachments

  • 20251023_113226.jpg
    20251023_113226.jpg
    1.9 MB · Views: 1,162
Need more photos on this without the sleeping pad on top... lol This is sick dude.

Is the bottom level from the cargo area to the backseat? Curious to see how the totes sit on the floor..
 
How straight can you actually sleep? I am 5 foot 9 and I just don't think I could straighten out my legs enough to be 100% comfortable. I am going to pull my 2nd and 3rd rows out soon though.
 
How straight can you actually sleep? I am 5 foot 9 and I just don't think I could straighten out my legs enough to be 100% comfortable. I am going to pull my 2nd and 3rd rows out soon though.

Its kinda tight back here. I slept on the Air Down Gear Up drawer system with the sleeper for the first time on our Rubicon trip for three nights. I'll upload some photos when I get a chance.
 
@MikeDuffy looks like you have the non-hybrid? Definitely more headspace when you wake up for sure.

@TurboGuy2000 I'm also 5'9" and had the perfect amount of space to sleep with a little room to spare. It's always tight in the back of a vehicle, even the 5th Gen, but there is enough room for us to sleep back here, length-wise. The sleeper system on the @Air Down Gear Up system extends to the edge of the passenger seat (you can opt for a full sleeper as well, I just took off the driver side), and if you adjust the seat all the way forward, you can buy yourself another 8-10", making it plenty of room to stretch out. If you do push the seat all the way forward with this system, for example, though, it creates a gap between the sleeper platform and the backseat, so my pillow was slipping off the platform into the gap. This was the first night sleeping on it. For the next couple of nights, I built up some material using storage boxes until it was level, and then moved the Luno mattress over the edge. It ended up being perfect. If you're a guy pushing 6' though, it's going to be tight back here.

74W_Portals_6G_4Runner_63.jpg


74W_Portals_6G_4Runner_64.jpg
 

New Threads

Just purchased this 2026 SR5 4WD and first...
First time in legit snow and ice with 25...
I'm new to the group. I bought a 6 Gen 4Runner...

Recent

Just purchased this 2026 SR5 4WD and first thing i did is put on some beefier tires. If anyone...
How to Locate, Check, and Replace Fuses on the 6th Generation 4Runner (Reference: 2025 Owner’s...
I'm new to the group. I bought a 6 Gen 4Runner Limited a month ago. I am installing a front and...
First time in legit snow and ice with 25 Limited. She handled it beautifully. Really can...
While the roll-down rear window is one of the top distinguishing features of the 4Runner, I was...
I got some hood strutss from Cali Raised LED by Redline Tuning. They are for the 4th Gen Tacoma...
Thanks for allowing me in the community. I just picked up a 2026 Platinum this weekend! I'm...
Hello, I’m reaching out to see if anyone has experienced brake issues when reversing out of...
If you want a FREE 6G4R.com decal, comment below with "6G4R.com Decal". That's it. Each free...
I wanted to kick off a thread for Ice Cap 6G inspiration. Every time I see one of these...
My 2025 TRD offroad mods so far include: Wescott full roof rack Cali Raised sliders w/bumpout...
Yo guys, finally got the Old Man Emu MT64 suspension installed on the 6th Gen 4Runner and wanted...

Similar

Back
Top